INSTRUCTIONS
Step 2
Test Strips
$13.95
$13.95Add to cart
After filling the spa through the filter area. Test the water with the test strips given to you by your hot tub retailer.
Step 3A
PH Increaser
$7.95
$7.95Add to cart
1. Always turn on the pumps when adding the chemicals. The pumps will shut off automatically in 15-30 minutes on most hot tubs.
2. Use test strips to check the PH levels.
3. Always maintain the pH of your spa water between 7.2-7.8. A low pH (below 6.8) can cause damage to any metal parts, pillows, covers, and the spa’s acrylic shell.
4. Add one ounce and re-test every 30 minutes until the ideal range is met. Check and adjust the PH often.
5. Compatible with H2O Deep Clean Sanitizer, chlorine, bromine, ozone, and biguanide sanitizers.
Step 3B
PH Decreaser
$8.95
$8.95Add to cart
Balance the Spas PH using PH Increaser or Decreaser
1. Turn on all the jets
2. Add 1-2 oz of Increaser or Decreaser (depending on what the Test Strips read)
3. Retest water in 30 minutes
4. Repeat until PH is 7.2-7.8
Step 4
Metal B Gone
$13.49
$13.49Add to cart
Add a full bottle of Metal B Gone and let it circulate for 15 minutes.
Step 5
Spa Defense
$24.95
$24.95Add to cart
At start up add 2oz for up to 500 gallons. Add 2oz for up to 500 gallons once a week.
Step 6
H2O Deep Clean Sanitizer
$29.95
$29.95Add to cart
At start up add 4oz for up to 500 gallons. Every time you get out of the spa, add one ounce of H20 Deep Clean per bather for up to a 500 gallon spa.
Step 7
Bright N’ Clear
$19.95
$19.95Add to cart
Add 2oz for up to 800 gallons. Also use 1 time a week.
FROG @EASE INSTRUCTIONS
Step 1
Frog @Ease Floating System
$53.95
$53.95Add to cart
1. For new water add the initiator packet to establish the SmartChlor level.
2. Connect the Mineral Cartridge to the SmartChlor cartridge.
3. Depending on the bather use dial the SmartChlor cartridge between 1 and 5.
4. See @ease instructions for more detailed instructions.
Step 2
Frog @Ease Replacement SmartChlor Cartridges 3 Pack
$53.95
$53.95Add to cart
1. For new water add the initiator packet to establish the SmartChlor level.
2. Connect the Mineral Cartridge to the SmartChlor cartridge.
3. Depending on the bather use dial the SmartChlor cartridge between 1 and 5.
4. When the SmartChlor cartridge is empty it will flip over.
5. Replace when the cartridge is empty.
6. See @ease instructions for more detailed instructions.
OTHER PRODUCTS FROM CRYSTAL CLEAN 123
Filter Cleaner
$23.95
Foam B Gone
$10.95
