When you are first filling your spa and or refilling your spa or swim spa. Always remove all the filters and fill through the filter area to prevent an airlock.
Step 1: Wax Your Spa
Clean and Wax your Spa with Spa Gloss.
Step 2: Test Your Water
After filling the spa through the filter area. Test the water with the test strips given to you by your hot tub retailer.
Step 3: Balance Your PH
Balance the Spas PH using PH Increaser or Decreaser
1. Turn on all the jets
2. Add 1-2 oz of Increaser or Decreaser (depending on what the Test Strips read)
3. Retest water in 30 minutes
4. Repeat until PH is 7.2-7.8
Step 4: Metal B Gone
Add a full bottle of Metal B Gone and let it circulate for 15 minutes.
Step 5: Spa Defense
At start up add 2oz for up to 500 gallons. Add 2oz for up to 500 gallons once a week.
Step 6: H20 Deep Clean
At start up add 4oz for up to 500 gallons. Every time you get out of the spa, add one ounce of H20 Deep Clean per bather for up to a 500 gallon spa.
Step 7: Bright N Clear
Add 2oz for up to 800 gallons. Also use 1 time a week.
OTHER PRODUCTS FROM CRYSTAL CLEAN 123
This product is a natural enzyme cleaner that eliminates the oils lotions and organics that cause unsightly scum and odors in spa water. This product surfaces and is compatible with Crystal Clean H20 Deep Clean Sanitizer
Foam B Gone
Eliminates foam quickly. This product eliminates annoying foam build up in spas, hot tubs, or swim spas
Degreases and improves filter efficiency. This liquid filter cleaner greatly improves filter life and efficiency. It is specially made to cleanse suntan oil and grease as well as scale and mineral deposits from spa filters.